XM, XF

Call Rod End Supply inside sales personnel at 1-800-284-2902 with your specific application needs.

XM Rod end XF Rod End
XM
BALL RACE BODY
52100 BEARING STEEL INJECTION 4130 STEEL
PRECISION GROUND MOLDED HEAT TREATED
HEAT TREATED NYLAFIBER CHROME PLATED
HARD CHROME PLATED MATRIX  
XF

CAUTIONS

  1. DO NOT LUBRICATE: The rod ends listed below are self-lubricating. Additional lubricants may attract dirt and/or interfere with the self-lubricating properties of the component and may cause accelerated wear.
  2. Do not install any component listed here, on this site or in our catalog before you READ, UNDERSTAND AND ACCEPT THE WARNINGS.
  3. DO NOT OPERATE VEHICLE WITH WORN OR CONTAMINATED ROD ENDS.

NOTES

  1. FOR LEFT HAND THREADS ADD "L" TO PREFIX. EXAMPLE: XML12 *Right Hand Only
  2. FOR STUDS ADD "Y" TO SUFFIX. EXAMPLE: XM12Y

XM, XF CHROMOLY STEEL SELF LUBRICATING & SELF SEALING NYLAFIBER MATRIX RACE

RES PART NO.BORE X THD. SIZE REF.B DIA. +.0015 -.0005D DIA. +.010 -.010W WIDTH + .000 - .005T WIDTH + .005  - .005BALL DIA.
REF.		AM LGTH. -.015 +.015Af LGTH. -.015 +.015N THD. UNF. 3A-2BCM LGTH. +.062 -.031CF LGTH. +0.62 -.031E DIA. -.010 +.010F WRENCH FLAT +.010 -.010a MIS. ANG. REF.ULT. STATIC RADIAL LOAD(LBS.)APPROX. WEIGHT
(LBS.)
XM 3 3/16x10-32 .1900 .625 .312 .250 .437 1.250 - 10-32 .750 - - - 13 2851 .03
XF 3 3/16x10-32 .1900 .625 .312 .250 .437 - 1.062 10-32 - .562 .406 .312 13 3733 .04
XM 4 1/4x1/4-28 .2500 .750 .375 .281 .500 1.562 - 1/4-28 1.000 - - - 16 5260 .04
XF 4 1/4x1/4-28 .2500 .750 .375 .281 .500 - 1.312 1/4-28 - .750 .469 .375 16 6190 .06
XM 5 5/16x5/16-24 .3125 .875 .437 .344 .625 1.875 - 5/16-24 1.250 - - - 14 7639 .07
XF 5 5/16x5/16-24 .3125 .875 .437 .344 .625 - 1.375 5/16-24 - .750 .500 .437 14 7639 .09
XM 6 3/8x2/8-24 .3750 1.000 .500 .406 .719 1.938 - 3/8-24 1.250 - - - 12 9544 .11
XF 6 3/8x3/8-24 .3750 1.000 .500 .406 .719 - 1.625 3/8-24 - .937 .687 .562 12 9544 .15
XM 7 7/16x7/16-20 .4375 1.125 .562 .437 .812 2.125 - 7/16-20 1.375 - - - 14 10285 .16
XF 7 7/16x7/16-20 .4375 1.125 .562 .437 .812 - 1.812 7/16-20 - 1.062 .750 .625 14 10285 .20
XM 8 1/2x1/2-20 .5000 1.312 .625 .500 .937 2.438 - 1/2-20 1.500 - - - 12 16238 .25
XF 8 1/2x1/2-20 .5000 1.312 .625 .500 .937 - 2.125 1/2-20 - 1.187 .875 .750 12 16238 .33
XM 10 5/8x5/8-18 .6250 1.500 .750 .562 1.125 2.625 - 5/8-18 1.625 - - - 16 17995 .38
XF 10 5/16x5/8-18 .6250 1.500 .750 .562 1.125 - 2.500 5/8-18 - 1.500 1.000 .875 16 17995 .48
XM 12 3/4x3/4-16 .7500 1.750 .875 .687 1.312 2.875 - 3/4-16 1.750 - - - 14 28081 .60
XF 12 3/4x3/4-16 .7500 1.750 .875 .687 1.312 - 2.875 3/4-16 - 1.750 1.125 1.000 14 28081 .72
XM 14 7/8x7/8-14 .8750 2.000 .875 .765 1.375 3.375 - 7/8-14 2.000 - - - 7 45051 .91
XF 14 7/8x7/8-14 .8750 2.000 .875 .765 1.375 - 3.375 7/8-14 - 1.875 1.300 1.125 7 45051 .93
XM 16-1 1x1-14 1.000 2.750 1.375 1.015 1.875 4.125 - 1-14 2.125 - - - 17 76200 2.41
XF 16-1 1x1-14 1.000 2.750 1.375 1.015 1.875 - 4.125 1-14 - 2.125 1.625 1.500 17 76200 2.45

HEAVY DUTY SHANK (NO FEMALE AVAILABLE IN HEAVY DUTY SHANK)

RES PART NO.BORE X THD. SIZE REF.B DIA. +.0015 -.0005D DIA. +.010 -.010W WIDTH + .000 - .005T WIDTH + .005  - .005BALL DIA.
REF.		AM LGTH. -.015 +.015Af LGTH. -.015 +.015N THD. UNF. 3A-2BCM LGTH. +.062 -.031CF LGTH. +0.62 -.031E DIA. -.010 +.010F WRENCH FLAT +.010 -.010a MIS. ANG. REF.ULT. STATIC RADIAL LOAD(LBS.)APPROX. WEIGHT
(LBS.)
XM 5-6 5/16x3/8-24 .3125 1.000 .437 .344 .625 1.938 - 3/8-24 1.250 - - - 12 12978 .11
XM 6-7 3/8x7/16-20 .3750 1.125 .500 .406 .719 2.125 - 7/16-20 1.375 - - - 10 17508 .16
XM 7-8 7/16x1/2-20 .4375 1.312 .562 .437 .812 2.438 - 1/2-20 1.500 - - - 12 23452 .25
XM 8-10 1/5x5/8-18 .5000 1.500 .625 .500 .937 2.625 - 5/18-18 1.625 - - - 10 31390 .38
XM 8-12 1/2x3/4-16 .5000 1.750 .750 .562 1.125 2.875 - 3/4-16 1.250 - - - 13 40572 .60
XM 10-12 5/8x3/4-16 .6250 1.750 .750 .562 1.125 2.875 - 3/4-16 1.750 - - - 13 40572 .60
XM 12-14 3/4x7/8-14 .750 2.000 .875 .687 1.312 3.375 - 7/8-14 2.000 - - - 12 55692 .92
XM 16 1x1 1/4-12 1.000 2.750 1.375 1.015 1.875 4.125 - 1 1/4-12 2.125 - - - 17 76200 2.41
*XM 6-8 3/8x1/2-20 .3750 1.312 .625 .500 .937 2.438 - 1/2-20 1.500 - - - 12 23452 .25
*XM 6-10 3/8x1/2-20 .3750 1.500 .625 .500 .937 2.625 - 5/8-18 1.625 - - - 13 31390 .38