COM-N/HCOM-N: Spherical Bearings "Uniball"

Call Rod End Supply inside sales personnel at 1-800-284-2902 with your specific application needs.

spherical bearings   uniball
COM-N/HCOM-N  
BALL RACE BODY
52100 BEARING STEEL  INJECTION MOLDED CARBON STEEL
HEAT TREATED  NYLAFIBER HEAT TREATED
HARD CHROME PLATED  MATRIX ZINC PLATED
     

CAUTIONS

  1. DO NOT LUBRICATE: The rod ends below are self-lubricating. Additional lubricants may attract dirt and/or interfere with the self-lubricating properties of the component and may cause accelerated wear.
  2. Do not install any component listed here, on this site or in our catalog before you READ, UNDERSTAND AND ACCEPT THE WARNINGS.
  3. DO NOT OPERATE VEHICLE WITH WORN OR CONTAMINATED ROD ENDS.

COM-N/HCOM-N SPHERICAL BEARINGS "UNIBALL"

RES
PART
NO.		BORE
SIZE REF.		B DIA.
+.0015
-.0005		D DIA.
+.000
-.0007		W WIDTH
+ .005
- .005		T WIDTH
+ .005
- .005		BALL DIA.
REF.		O
DIA..
REF.		F
CHAMFER
REF.		a
MIS.
ANG.
REF.		ULT.
STATIC
RADIAL
LOAD
(LBS.)		APPROX.
WEIGHT
(LBS.)
COM 8N 1/2 .5000 1.0000 .500 .390 .781 .600 .032 9.5 13,257 .065
COM 10N 5/8 .6250 1.1875 .625 .500 .968 .739 .032 8.5 21,280 .110
COM 12N 3/4 .7500 1.4375 .750 .593 1.187 .920 .044 9 31,920 .204
COM 14N 7/8 .8750 1.5625 .875 .703 1.312 .980 .044 9.5 41,960 .263
COM 16N 1 1.0000 1.7500 1.000 .797 1.500 1.118 .044 10 55,200 .386
HCOM 16N 1 1.0000 2.0000 1.000 .781 1.687 1.360 .032 9 70,820 .553
HCOM 20N 1-1/4 1.2500 2.3750 1.187 .937 2.000 1.610 .032 8.5 100,730 .895
HCOM 24N 1-1/2 1.5000 2.7500 1.375 1.094 2.312 1.860 .032 8.5 135,950 1.358
HCOM 32N 2 2.0000 3.5000 1.750 1.375 2.937 2.360 .044 8.5 217,060 2.650