BBEM: HIGH STRENGTH ALLOY STEEL 2 PIECE

Call Rod End Supply inside sales personnel at 1-800-284-2902 with your specific application needs.

BBEM alloy stell rod end  
BBEM
BALL BODY
52100 BEARING STEEL 4130 CHROMOLY STEEL
PRECISION GROUND HEAT TREATED
HEAT TREATED BLACK OXIDE COATED
HARD CHROME PLATED  
 

CAUTIONS

  1. Lubrication Required: To insure proper function, the rod ends listed below must be lubricated. To insure complete lubrication, before installation, rotate ball bore 90 to installed position, fill housing with high-quality grease. Restore ball bore to installed position, wipe off excess grease and install.
  2. Lubricants may attract dirt and other abrasive contamination. Rod ends must be removed, thoroughly cleaned, inspected, and re-greased whenever contamination of any kind is present.
  3. Do not install any component listed here, on this site or in our catalog before you READ, UNDERSTAND AND ACCEPT THE WARNINGS.
  4. DO NOT OPERATE VEHICLE WITH WORN OR CONTAMINATED ROD ENDS.

NOTES

  1. FOR LEFT HAND THREADS ADD "L" TO PREFIX. EXAMPLE: BBEML12
  2. FOR STUDS ADD "Y" TO SUFFIX. EXAMPLE: BBEM12Y
  3. FOR TEFLON LINER ADD "T" TO SUFFIX. EXAMPLE: BBEM12T

BBEM ROD ENDS

RES PART NO.BORE X THD. SIZE REF.B DIA. +.0025 -.0005D DIA. +.010 -.010W WIDTH + .005 - .005T WIDTH REF.BALL DIA.
REF.		AM LGTH. -.015 +.015N THD. UNF. 3A-2BCM LGTH. +.062 -.031E DIA. .010a MIS. ANG. REF.ULT. STATIC RADIAL LOAD (LBS.)APPROX. WEIGHT (LBS.)
BBEM 5 5/16X5/16-24 .3125 .875 .437 .312 .625 1.875 5/16-24 1.250 - 22 7,100 .07
BBEM 6 3/8X3/8-24 .3750 1.000 .500 .359 .719 1.938 3/8-24 1.250 - 22 10,500 .11
BBEM 7 7/16X7/16-20 .4375 1.125 .562 .406 .812 2.125 7/16-20 1.375 - 21 12,650 .15
BBEM 8 1/2X1/2-20 .5000 1.312 .625 .453 .937 2.438 1/2-20 1.500 - 20 17,000 .24
BBEM 10 5/8X5/8-18 .6250 1.500 .750 .484 1.125 2.625 5/8-18 1.625 - 26 18,000 .36
BBEM 12 3/4X3/4-16 .7500 1.750 .875 .593 1.312 2.875 3/4-16 1.750 - 24 25,000 .57

HEAVY DUTY SHANK

RES PART NO.BORE X THD. SIZE REF.B DIA. +.0025 -.0005D DIA. +.010 -.010W WIDTH + .005 - .005T WIDTH REF.BALL DIA.
REF.		AM LGTH. -.015 +.015N THD. UNF. 3A-2BCM LGTH. +.062 -.031E DIA. .010a MIS. ANG. REF.ULT. STATIC RADIAL LOAD (LBS.)APPROX. WEIGHT (LBS.)
BBEM 8-10 1/2X5/8-18 .5000 1.500 .750 .453 .937 2.625 5/8-18 1.625 - 26 19,300 .30
BBEM 10-13 5/8X3/4-16 .6250 1.750 .750 .484 1.125 2.875 3/4-16 1.750 - 24 27,000 .48